Whirlpool model WTW4800BQ1 shows F2 - E3 error code.

The F2E3 error means the following on that model means:

Fault is displayed when the Main Control detects an out of range pressure signal. • Check pressure hose connection from tub to pressure sensor. Is hose pinched, kinked, plugged, or leaking air? If the pressure sensor hose is ok you need to replace the main board because the pressure switch on your model is built into the control board. The pressure sensor hose is the hose you see going to the control board down to the side of the tub. The control board you need for that model is linked below:

https://prismparts.com/products/whirlpool-washer-electronic-control-board-pp5710185