Questions And Answers

Washer Won't Run Cycle

Question: Washer Won't Run Cycle

I unplugged my washer (model# wfw9050xw00) mid-cycle because it was shaking hard. The door was locked(which we got to open) but now whenever I try to run any cycle it won't start and gives me the F3E2 error code. Is there something I can do to get it to start or drain?

The only thing you do for that error if it won't reset is to change the temperature sensor. The error code you are getting means the sensor has failed.The sensor you need to order for that model is linked below:

https://prismparts.com/products/for-whirlpool-duet-washer-water-temperature-sensor-pp6881206?_pos=1&_sid=2a5d38935&_ss=r

If you would like to test the sensor and have an ohmmeter see page 77 section 5-7 for testing instructions.

Directions to access and replace the sensor are on page 60 section 4-22.

The service manual for your model can be downloaded from the link provided below. 

https://drive.google.com/file/d/1EuvKY9ciC41ebBBZ3-YZpyfnhX0IkQaS/view?usp=sharing

 

 


View Page This Question Was Posted On