I get an F10 code at any time during the day. Sometimes in the middle of cooking, sometimes after I’ve already turned off the oven, and sometimes randomly in the middle of the night when the oven is room temp. I never have to flip a breaker, just hit the cancel button (turn the oven off), and if I’m in the middle of baking, then just turn it back on to the temp I’m baking at, or turn the broiler back on. I haven’t tested yet to see if the problem is the probe, the wiring, or the panel, but I’m thinking maybe the probe since it can happen even when the oven is off and at room temp. I also have a separate oven thermometer that I keep in my oven, and it’s actually never overheated. As a matter of fact, it generally runs lower than the set temp. And the higher it’s set, the less accurate it is. My oven goes up to 550 degrees, I have to set it all the way to the upper limit to get a temp of 450 in the oven, so I can never bake higher than that. At lower temps, the variance isn’t as bad, like setting it to 400 to get 350, or setting it to 350 to get 325.Any guidance you can give with the info provided? Also, my model# is FES365ECE, if you could provide me with the correct part number I may need based on all this info. Thanks

Hello, 

From the information, you have given it can be easily concluded that the f10 error is being caused by the main control board. This comes from the fact the error is coming up even when the oven is not in use which means it would be impossible that the temperature sensor is causing the problem because when the oven is not in use the control is not reading the resistance of the sensor so there is no way the sensor can be causing the error. The control board you need for the model you have listed can be ordered at the URL linked below:

https://prismparts.com/products/frigidaire-range-electronic-oven-control-pp9971054