F1 is flashing. Stove not working.

The F1 could be any of the following failures.

1.Shorted keypad.

2.Control's internal checksum may have become corrupted.

3.Control has sensed a potential runaway oven condition. Control may have shorted relay, RTD sensor probe may have gone bad.

The first thing to do is try and reset the electronics by killing power to it at the breaker/fuse panel on your home for one full minute then restore power. If after that the problem persists then one of the failures above has occurred. You can test the temperature sensor with an ohmmeter. The sensor should have 1100 ohms at room temperature if not the sensor is bad. If the sensor checks out ok the main control is bad.