Removing the console on your Whirlpool Cabrio washer is essential when you need to access internal components, such as the water inlet valve, for repair or replacement. Follow these clear, step-by-step instructions to safely remove the console on your Whirlpool Cabrio washer model.

Tools Needed:

• Putty knife
• Quarter inch hex head screwdriver

Step-by-Step Instructions:

Step 1: Disconnect the Power
Ensure your safety by unplugging the washer from the electrical outlet before starting any repair. This step prevents any accidental electric shock or injury.

Step 2: Turn Off the Water Supply
Locate the water supply valves behind your washer and turn them off. This is crucial to avoid any water leakage or flooding while working on the washer.

Step 3: Remove the Mounting Screws
At the back of the control panel, you will find two quarter inch hex head screws securing the console to the top panel of the washer. Use a quarter inch hex head screwdriver to carefully remove these screws.

Step 4: Release the Console Clips
With the screws removed, the next step is to release the console clips that hold the control panel in place. Insert a putty knife gently between the console assembly and the top panel of the washer. Push back on the top of the console while maneuvering the putty knife around the screw area. This will release the console clip. Repeat this process for both the right and left sides of the console.

Step 5: Flip the Console Forward
Once both clips are released, flip the control panel forward. Be cautious not to pull too hard, as there may be wires connected to the console that could be damaged if stretched too far.

Important Safety Tips:

• Always unplug the washer from the electrical outlet before starting any repair work.
• Ensure the water supply is completely turned off to prevent water damage or flooding.
• Handle the control panel carefully to avoid damaging any internal components or wiring.

By following these steps, you can safely and efficiently remove the console on your Whirlpool Cabrio washer to access internal components for repair or replacement. If you encounter any difficulties or need further assistance feel free to submit a question and we will be glad to help further.