Appliance Error Codes

Repair Guides

Appliance Repair Guides

Here you'll find comprehensive guides for troubleshooting and repairing appliances.

How To Repair F4E0 Error Code On Admiral Top-load Washer Model ATW4516MW

Appliance Overview
Brand: Admiral
Model Number: ATW4516MW
Appliance Type: Washer

Type: Top Load Washer

Common Issue: - Washer Won't Start. - Washer Won't Wash Or Spin.

Repair Advice:

The F4E0 error is a most commonly a faulty shift actutator and it will need to be replaced to fix your washer.

Changing the Shift Actuator on Admiral Top-Load Washer ATW4516MW

To replace the shift actuator in your Admiral Top-Load Washer Model ATW4516MW, follow these steps:

  1. Unplug the Washer: Safety first. Disconnect the washer from the power supply to prevent any electrical hazards.
  2. Access the Actuator: The shift actuator is typically located beneath the tub. Remove the back panel or tilt the washer back for access, if necessary.
  3. Remove the Old Actuator:
    • Disconnect any wiring harnesses attached to the actuator.
    • Unscrew the mounting screws that hold the actuator in place.
    • Carefully remove the actuator from its position.
  4. Install the New Actuator:
    • Place the new actuator in the same position as the old one.
    • Secure it with the mounting screws.
    • Reconnect the wiring harnesses.
  5. Reassemble and Test: After installation, reassemble any parts or panels you removed. Plug the washer back in and run a test cycle to ensure the new actuator is functioning correctly.


Need Help?

Ask A Question About F4E0 Error Code On Admiral Top-load Washer Model ATW4516MW

Parts You May Need To Fix F4E0 Error Code On Admiral Top-load Washer Model ATW4516MW

Admiral Washer Shift Actuator

Shift Actuator

The information on this site is intended for qualified service technicians and technically knowledgeable audience. All communications are opinions only and should not be considered a replacement for professional advice and/or service.