Appliance Overview
Brand: Bosch
Model Number: SMU68M15AU/01
Appliance Type: Dishwasher

Appliance type: Dishwasher

Common Issue: - Dishwasher not washing or draining. - E25 error showing on the control panel

Repair Advice:

If your Bosch dishwasher SMU68M15AU/01 is not washing, filling up with water, and displaying an E25 error, follow these troubleshooting steps:

Bosch Dishwasher Error E25: Troubleshooting and Fixing

Error code E25 in Bosch dishwashers indicates a problem with draining, usually caused by blockages or a malfunction in the drain pump or hose. Follow these steps to troubleshoot and resolve the issue:

1. Safety First: Disconnect the dishwasher from the power source to ensure safety during troubleshooting.
2. Check for Blockages:
   • Inspect and clean the filter and sump at the dishwasher's bottom for any food debris or obstructions.
   • Examine the drain hose for kinks or clogs. Straighten or replace if necessary.
   • Ensure that the air gap or garbage disposal (if connected) is not blocked.
3. Inspect the Drain Pump:
   • Locate the drain pump, usually behind the lower kick panel.
   • Remove any foreign objects obstructing the pump impeller.
   • Check that the pump impeller rotates freely. Replace the pump if it's jammed or damaged.
4. Test the Drain Pump: Use a multimeter to test for continuity in the drain pump. A lack of continuity indicates a need for replacement.
5. Reassemble and Test: After clearing blockages or replacing the pump, reassemble the dishwasher, reconnect the power, and run a test cycle.
6. Additional Considerations: Ensure all hose connections are secure and check the water inlet valve's functionality.

If the problem persists, consider consulting a professional technician, as the issue might be related to the control board or sensor malfunction.